Milling machine

Heavy duty milling machine







• Extra Large Table Size: 58" X 11" (1,437 x 279mm)
• Maximum Uniform Table Capacity: 1200 lbs. (550 kg)
• Spindle motor: 4 HP. Infintely variable speed 55 to 4250 RPM
• Spindle Taper: #40 taper
• Power and Rapid Feeds: in all 3 axes (Longitudinal, Cross, Knee)
• Extra Table Longitudinal X Handwheel on Front of Saddle.
• Square Ways for rigidity and Dove Tail Guides for Accuracy - Hardened and Ground Square Ways
• Head Rotation: Left & Right
• Head Tilt: Front to Back (Knuckle Joint)
• Electrics: 220/440 Volts; 60Hz; 3 Phase NEMA-type Enclosure with disconnect switch and push button controls on head.
Model FTV-4L-SP: Special Precision with Longitudinal & Cross Ball Screws, 3 Axis Digital Readout, Power Draw Bar, Telescopic Metal Way Cover.

Table travel X-axis: manual with power feed 39" (991mm) / 38" (965mm) Cross travel, Y axis: 15" (381)
Knee travel, Z axis: 15 1/8" (484mm)
Ram travel: 22-3/16" (563mm)
Head swivel: +/- 90 degrees
Head tilt: +/- 45 degrees
Distance, spindle to column: 5 to 27"
Power quill feeds to quill/rev. .0015, .003, .006 inch/rev
Quill travel: 5" (127mm)
Machine weight: 4,000 lbs. (1,814 kg)
Power: Dual Voltage Motors 220/440 Volts


Horizontal vertical milling machine







Variable speed on vertical and horizontal spindles
• Quality manufactured in Spain.
• Dynamically balanced vertical head with high velocity cooling sys
• Flood coolant system
• Meehanite castings throughout
• Extra wide saddles
• Precision ground leadscrews
• Class 7 spindle bearings
• Hardened & ground square ways with dovetail guide
• Dual knee & table locks
• One shot lubrication system
• Outboard column support for added rigidity
• 1200 lb. table load capacity
• Heavy duty No. 40 taper spindle, horizontal & vertical heads. Both are variable speed.
Table size: 58" x 11"
Table travel X-axis: 37" manual / 33 5/8" using optional power feed
Cross travel, Y axis: 17 ½"
Knee travel, Z axis: 16"
Ram travel: 22 ½"
Machine weight: 4410 lbs.
Vertical Milling Head:
Infinite variable speed motor: 3 HP, 70 to 4200 RPM
Head swivel: +/- 90 degrees
Head tilt: +/- 45 degrees
Quill travel: 5"
Horizontal Milling Spindle:
Variable speed motor: 5.5 HP, 35 to 1800 RPM (hi-low)
Distance from spindle center to ram: 5 ¾"