Measuring tools

Portable Surface Roughness Tester




Robustly constructed, featuring a durable cast aluminum housing, and designed for shop or laboratory use, the Pocket Surf will provide years of reliable and accurate surface finish gaging. The Pocket Surf is also designed to take measurements from a variety of positions and several angles. It works on both horizontal and vertical surfaces and can even be used upside down. For versatility it operates in four probe positions —extended, closed, or with the probe at 90 °,180 ° or 270

Pocket Surf Parameters & Features

Ra Average Roughness
Ry Maximum Roughness Depth
Rmax Maximum Roughness Depth ((DIN)
Rz ((Rtm)Mean Roughness Depth (DIN)
Meets ANSI, ISO, DIN & MIL Specifications
Convenient digital display located on top
Easy to read LCD readout
Roughness in microinches or micrometers
Out of range (high or low) Indicator
Battery Low ”indicator
RS-232 Output for SPC applications
Works on standard 9V Alkaline
Includes fitted case, standard & probe




Touch Trigger Probe


computer controlled CMM's, the P1-5BS has 3 led illuminators to indicate probe hits, can accept a variety of shank sizes and is compatible with any M2 probe styli.

Fowler P1-5BS Probe Features:

5-Axis: measures in ±X, ±Y and +Z axes
Deviation: ±1um - Repeatability: 0.5um
Stylus force: 9 grams
Over travel: XY ±15°, +3.0mm
Probe Status Indicator: 3 Green LED (120° spaced)
Shank mounting: 3/8", 14mm, 20mm, Special
Styli mounting: M2 Thread
Output: TTP compatible (Standard)
Connector: 5 Pin DIN (180°)
Dimensions: OD: 20mm Length: 42mm + S







Manual indexable Probe Body


Supplied with a internal M8 thread it can accept nearly any touch probe. The unit can rotate through 360° in the B axis and 0-90° in the A axis - in 15° increments for a total of 168 repeatable positions.





Universal Gage Calibration System



Manufactured with advanced materials and components, the LabConcept sets a new standard for lab instruments. Designed for checking and setting of gages, internal and external measuring equipment and the measurement of precision components, Lab-Concept's Swiss quality, simplicity of design and its ease of use allows precise and quick performance of all inspections and measurements. The system is completely turnkey, and includes a flat panel touchscreen and industrial Windows PC for operator interaction.




Z-Cal line of height gages

Utilizing the latest in Sylvac electronics, the XT Series height gages allow for measuring of heights, surfaces, inside & outside diameters, slots and centerline locations all without changing probes. Enhanced electronics allow for more measuring functions and improved inspection capability including built in SPC, X-Bar/Range and Histogram charts.

Z-Cal 600 XT Features:

Measures heights, steps, depth and slots.
Measures internal and external diameters, centerline distance.
Measures squareness and angles with optional probe.
2 speed, motorized Z travel. Can be user programmed.
Direct inch/metric conversion, Min/Max/TIR conversion.
Large, high-contrast matrix display & keypad.
Stores 99 Parts Programs with tolerances.
Rechargeable Battery with Mains adapter included.
Direct RS232C output connects to computer or optional printer.
Special application accessories available.
Built-in air pump to reduce wear and fatigue.
Automatic Diameter and Centerline functions.
Incremental floating zero & 9 presets.
Built-in SPC with X-bar, histogram and full statistics.
Optical tolerance indicators (yellow - green - red).





Vectra & Mestra-Touch height gage

Ease of use and quick performance of all required measuring tasks allow unlimited application in any manufacturing area. The new measuring system guarantees optimum measurement accuracy and is as well insensitive to environmental influences.

An extremely resistive double measuring carriage, a clearly defined color touch-screen display unit, optimum repeatability of measurements obtained by a motorized probing system as well as an entire digital measuring system.


Vectra & Mestra-Touch Specifications:
Available Ranges: 0-12"/305mm | 0-24"/610mm | 0-40"/1016mm
(with 2nd Probe Holder): 0-22"/567mm | 0-34"/872mm | 0-50"/1278mm

Resolution: 0.00001"/0.0001" (0.0001mm/0.001mm)
Measuring Pressure: Approx. 0.5 - 1.8 Newtons
Accuracy (STD):
Vectra: 2.5 +L(mm) / 400 µm
Mestra: 1.4 +L(mm) / 400 µm
Repeatbility: 0.00005" (0.001mm) (0.002mm on Diam.)
Output Type: RS-232 C (Bi-Directional)
Motor Measuring Speed: 6"/sec. (150mm/sec.)
Display: Color Touch-Screen w/Embedded Technology
Interface Connections: 2x RS232-C, 2x USB (A and B)
Operational Temperature: +10° to +40° C
Power Supply: Rechargeable Battery Pack (8 Hours)
Total Height : 25.4"/645mm | 37.4"/950mm | 53.4"/1357mm
Weight: 16kg | 19kg | 23kg





Trimos V+ Series Height Gages



Internal and external diameter measurement is accomplished with a unique floating carriage system and a built-in air pump facilitates easy movement and reduces operator fatigue. It's rechargeable battery can run for 120 hours on a single charge and it's direct RS-232 output makes it SPC ready

Utilizing the latest in Sylvac electronics, the V+ Series height gages allow for measuring of heights, surfaces, inside & outside diameters, slots and centerline locations all without changing probes. The gage is perfect for both the lab and shop environments.


V-Series Height Gage Specifications:

Ranges: 12"/300mm - 24"/600mm and 40"/1000mm
Accuracy: 3µm +(L(mm/300)
Resolution: .00005" and .001mm
Automatic Diameter and Centerline functions
Incremental floating zero & preset
Large, high-contrast LCD display & Keypad
Rechargeable Battery with 120 Hours usage life
Direct inch/metric conversion
Direct RS232C output connects to SPC or printer
Special application accessories available
Built-in air pump to reduce wear and fatigue
Measuring Speed = 60 "/1.5m per second

manufacturer website http://www.fvfowler.com




Hi-Cal Height Gage



Built on a proven Swiss design the new Hi-Cal now includes Direct USB and RS232 connectivity and a simultaneous display of both diameter and centerline information among its many features

Advantages:

Hi-Accuracy
Hi-Resolution
Hi-Repeatability
Hi-Funtionality
Hi-Connectivity


Hi-Cal Height Gage Specifications

Available Ranges: 0-6"/150mm | 0-12"/300mm
Resolution: 0.00005"/(0.001mm/1um)
Measuring Pressure: Adjustable Approx. 0.8 Newtons
Accuracy (STD): Accuracy: 2.5 [um] + (L/175) [mm]
Repeatbility: 2 um (.000080")
Output Type: RS-232 C (Bi-Directional) and USB
Display: Bright LCD with East to Use controls
Interface Connections: RS232, USB & Power
Operational Temperature: +10° to +40° C
Power Supply: Rechargeable Battery Pack (>40 Hours)





Altia Height Gage



Ease of use and quick performance of all required measuring tasks allow unlimited use
for our application"
The new inductive measuring system guarantees optimum measurement accuracy and is as well as being insensitive to environmental influences such as coolant,
oil, dust and water.

Repeatability & Accuracy

The patented measuring force setting system allows excellent repeatability by removing operator "feel".
The new Sylvac inductive measuring system guarantees a higher accuracy of measurements.



Altia Height Gage Specifications


Available Ranges: 0-14"/305mm | 0-18"/610mm*
0-24"/567mm | 0-28"/872mm*

Resolution: 0.00005"/(0.001mm/1um)
Measuring Pressure: Approx. 0.8 Newtons
Accuracy (STD):
Altia 350 .00059 (15um)
Altia 600 .00079 (20 um)
Repeatbility: 2 um (.000080")
Output Type: RS-232 C (Bi-Directional)
Display: Bright LCD w/Embedded Technology
Interface Connections: RS232
Operational Temperature: +10° to +40° C
Power Supply: Rechargeable Battery Pack (30 Hours)
Total Height : 25.4"/645mm | 37.4"/950mm |
Weight: 10kg | 12kg




Digital Cylinder Bore Gages



The display can be set to function on either inch or metric with switchable resolution, depending on the workpiece tolerance. With programmable preset on "MIN value", once the gage has been set with a single button press after a sweep of the gage, the component bore size can be read from the display.

Cylinder Bore Gage Features:

* Displays actual bore or comparative results (Min/Max Hold)
* Direct Inch/metric conversion
* Presettable to ring gage or setting master
* Resolution .00005 "/.001mm, .0005 "/.01mm
* Direct RS-232 output for SPC or printer
* Fast checking of bores -- size, ovality, taper, etc.
* Lightweight ABS gage shroud for extra protection
* Tungsten carbide contact points
* Thermally insulated for extra stability
* Robust construction for shop floor use
* 2-point measuring with 3-point centering.
* Ranges from 0.5" to 24" (12-600mm)




Universal ID/OD Gage






The large variety of accessories are easily and quickly interchanged, allowing precise measurements of virtually any type of workpiece, especially large, difficult to measure ones. A unique spring load system combined with a min/max electronic unit allow repetitive measurements everytime.

Universal Gage Features:

Internal and external measurement.
Large measuring range. (to 5 meters)
Constant measuring pressure.
Digital or mechanical readout.
Large range of accessories.
Anvil travel of .590" (15mm).
Min/Max/TIR measuring modes
0.00005" (0.001mm) resolution
SPC Direct RS232 output
LED Tolerance indication
270 Degree Rotating display
Two individual datum presets









Electronic Bore Gage



Bowers Electronic Bore Gage Heads cover a wider range of hole sizes than conventional air or electronic plug gages. Bowers' system needs fewer setting rings and no sleeves.

Superbore Features:
Highest Accuracy Heads
Self Centering Heads (2 or 3 Point)
Small Bore Measuring from 1-6mm
Minimal Operator Skill Required
Blind Bore from 14-300mm
Calibration Certificate Supplied
Robust Construction, Ok for Shop
Large Variety of Displays Available







Pistol-Grip Bore Gage System



Fowler/Bowlers introduces the next generation Holematic Mark II Pistol Grip System, covering a range from 0.080" - 12" (2 - 300 mm). Now with improved electronics, the system includes preset memory and a new easy-to-read swivel display.

Holematic Features:

Resolution to 0.00005" (0.001mm)
Blind Bore anvils on heads above 1/2"
Two Preset Memories for ring gages
Carbide anvils on heads above 1/2"
Direct Inch to Metric Conversion
Direct SPC RS-232 Output
2 Point heads 0.080" to 0.236"
3 Point heads 0.236" to 12.000"





Fowler Ultra-Tast Indicator




The Ultra-Tast Test Indicator series is made in Germany to our exacting specifications. Featuring the finest movements and fully jeweled bearings, the Ultra-Tast Test Indicator series is the finest mechanical indicator available today...

Fowler Ultra-Tast Indicator Features:

Jeweled movement bearings
Maximum sensitivity and accuracy
Satin-chrome finish on housing
Box-type housing opens on one side only
Easy to read -- large clear graduations.
Self-contained movement
Rugged construction for great durability.
Bezels rotate fully 360°.
Stylus: ball diameter 2mm. Swivel range 220°





Fowler Ultra-Light Mk III



Functional parts are made of the latest wear-resistant materials. Hollow section aluminum beam reinforced by two stainless steel guides. This system assures perfect guidance and protects the beam against shocks. These Calipers offer many advantages over conventional calipers: Lightness improves measuring results. Measuring pressure control for improved repeatability. All work contact faces are titanium-coated on hardened steel or are solid carbide. Fixed left jaw increases rigidity.

Fowler Ultra-Light Mk III Features:

Internal and external measuring - 2 presets
Patented Sylvac Inductive System
Direct RS-232 output to computer or printer
Large LCD Display Size
Resolution: .0005"/.01mm
Repeatability: 1 Digit
Direct IN/mm Conversion
Range: 12", 24", 40" and 60"
Hold feature freezes display for viewing
Protected to IEC529 IP54
Includes Fitted Wooden Case




UL Series Caliper


Fowler/Sylvac's line of light weight heavy duty electronic digital calipers include ranges to 72" (3 meters). This has been achieved by designing a well balanced instrument utilizing state-of-the-art material technology. Functional parts are made of the latest wear-resistant materials.
UL Series Caliper Specifications:

Ranges from 12" (300mm) to 72" (3 meters)
Hold feature freezes display for later viewing
Incremental floating zero & preset
Moveable end jaw can be adjusted for balance
Large, high-contrast LCD display
Lithium wafer battery 5000 hrs. of continuous on time
Direct inch/metric conversion
Direct RS232C output connects tool SPC or printer
Special application accessories available
Includes fitted wooden case
External Jaws: Length = 6"(150mm)
Internal Jaws: Length = .71" (18mm)
Jaw material: Titanium coated stainless steel
Measuring Speed = 60 "/1.5m per second
Weight 2.5 -- 3.5 Lbs. (1.15 -- 1.6 Kg)






Rivet Height Gage


Fowler/Bowers' new Electronic Depthmatic Rivet Gage — a new concept for measuring Rivet Heights.

Accurate measurements are achieved quickly and simply on the shop floor or in inspection. The large LCD display faces upward for convenient viewing from any angle.

Rivet Height Gage Features:

Measuring range 0—.5" (0—13mm).
Switchable resolution .0005/.00005" or .01/.001mm.
Large clear LCD display for easy reading.
Direct RS-232C output.
Two preset and reference memories.
Handy pocket size. Ideal for the workshop.
Min/Max/TIR and tolerance modes.
Lift up plunger to place contacts over rivet head.
Three hardened steel radius-shaped contact feet.
4-48 thread allows interchangeable contacts
Allows rivet height checks on flat and curved surfaces.







Ultra-Cal IV Coolant Resistant Caliper




First in a series of IP-65 protected instruments, Fowler's New Ultra-Cal IV Caliper is immune to coolant spray, moisture and oils common in workshop environments.
Features include:

4-way Measuring Jaws
Direct RS-232 Output
Large Display Size
Resolution: .0005"/.01mm
Repeatability: 1 Digit
Direct IN/mm Conversion
Hardened Stainless Steel
Range: 6", 8", 12"
Auto Off (selectable)
Protected to IEC529 IP-65
Includes Fitted Case





Mark IV Indicator



Mark IV Indicator Features:

Patented Sylvac measuring system
Extra large LCD for easy viewing
2 Measuring Datums
Dual Presets
9000 Hours battery life
Incremental floating Zero point
Resolution to 0.00005" (0.001mm)
Hold/Freeze function
Direct RS-232 output
ISO Standard AGD Group 2 compliant
Front face Rotates thru 270 Degrees




Fowler SnapCal




Fowler Introducing a new quick and easy way of measuring in a portable convenient tool. Fowler's Snap Caliper is ideal for measuring a wide range of materials from metal, plastics, and glass to small wires, fibers and paper products.

Fowler SnapCal Features:
Large Snap Range 0-1.27"
Resolution .0005"(.01mm)
Spring-loaded "Snap Action"
Flat blades for easy positioning
Accuracy .001" (.02mm)
Direct in/mm conversion
Measuring speed of 60"/sec
Large LCD display
2032 Lithium battery with...
4500 hrs. of continuous on time
Hardened stainless steel
Hanging loop included
Zero/Hold/Output button
3 Year Warranty




EZ-Read Micrometer




EZ-Read Micrometer Specifications:

Resolution 0.0001"
Accuracy 0.00016"
Rapid movement spindle
Insulated steel frame
Carbide tipped measuring faces
Patented design
Friction thimble with speed knob
2" and above includes standard
Includes fitted case




Euro-Cal III



Euro-Cal III Features:

Inside, Outside, Depth & Step measuring
Measuring Range of 0-6" / (0-150mm)
Resolution of 0.0005" / 0.01mm (selectable)
Full scale accuracy: 0.001" / 0.02 mm
Direct Inch to Metric Conversion
Hold feature freezes display for viewing
High efficiency lithium battery (2 years life)
Large LCD with 0.25" / 6mm digit height
Direct SPC Interface RS232 is integrated
Low battery indication




Electronic ID/OD Gage



Electronic ID/OD Gages for internal and external groove, wall thickness, ID, OD size measurements. Using measuring modes such as Actual, Min, Max and Tir make it easy to get accurate, consistent results everytime.


Fowler Electronic ID/OD Caliper Features:

Fast and accurate measuring
Programs for absolute and relative
Min, Max and TIR programs
Operates on a 3V lithium battery.
Inch/metric conversion
Large LCD display
Suitable for workshop and lab use
Data outputs RS 232 and Mitutoyo
Includes certificate, battery, manual & case





3D Positioning Sensor


Fowler 3D-Sensor Features:

You may approach it in any direction (X, Y- or Z-axis)
Large digital display or Analog Dial
Units are easily read even from long distances
Includes a 3/4" (20mm) clamping shaft
Replaceable steel tips
Analog Graduation of 0.0001", 0.00005" Digital
Furnished in fitted cases
Accurate within +/- 0.0002"